Leaching equipment composition structure

Leaching equipment composition structure, degree of difficulty and the size of its production scale oil extraction technology can take a different approach, a different oil content and components of different materials, the choice of extraction equipment is not the same. 
Domestic immersion leaching tank is commonly used as a small-scale extraction plant extraction device which looks like a cylindrical container, the diameter of the cylindrical portion is generally about 900-140Omm, its ratio of height to diameter is generally 1: (1 -1.1). Near the bottom of the cylindrical false bottom, which is composed of two layers mesh sieve 8mm in diameter around the middle clip with stainless steel wire mesh, publish or brown leather fibers and other components. False bottom fitted tightly on the lower lattice formwork, make false bottom tank material can withstand the weight of the embryo and the extraction solvent, and "under pressure" when operating steam pressure (usually about 98kPa), which is not deformed or broken. False bottom installed, requires only by mixing oils and solvents and other liquids, and feed meal and other solid particles can not pass.

Leaching equipment structures of different composition, structure and size of the various leaching equipment, the operation is basically the same. But for the entire extraction plant, every tank leaching operation can not be performed in isolation, must be evaporated leach tank and mixed with other oils, solvent recovery systems in close coordination, linked to each other. Thus, despite the leaching tank structure is relatively simple, and yet are unable sloppy specific operation, there must be relatively skilled and high sense of responsibility.