Sunflower remove stone

Sunflower remove stone mainly adopt proportion method, is based on the proportion of oilseeds and stones and suspendedat different speeds, using tilt the screen surface has a certain motion characteristics and the combined effect of airflow through the screen surface to achieve the purpose of grading stone. 
Sunflower remove stone principle, sunflower when to stone work, oilseeds fell from the hopper evenly on stoner sieve, due to the reciprocating shaker surface makes oil produced automatic classification, while oil by bottom-wear airflow past stone sieve, and its role resulting in a smaller proportion of oilseeds produced in the screen surface suspended phenomenon and movesdownward direction along the inclined surface of the screen, drips from the lower end of the sieve. And a large proportion ofstones sink close to the screen surface, the scaly mesh sieve special way thrust continuously along the sieve into the selectionexercise for the upper chamber, the chamber due to the selection of flip-scale screening the role of boards of reverse flow, so that mixed with gravel in oilseed returns downward and upward movement of the stones are smooth stone to the discharge port. Stoner should be fitted with air volume control mechanism to control the air flow and wind speed. Applications cover the top of stoner tightly sealed to reduce dust flying and prevent air short circuit.

                        
Sunflower remove stone equipment, oil processing plant currently used suction type gravity stoner, which is characterized by thework stoner negative pressure, which can effectively prevent dust outside and stand-alone production, but the need for a separate configuration Suction dust removal system. It mainly consists of the feeding device, sieve, eccentric drive mechanism,suction devices, racks and other components. Top of the machine to the inlet, which is connected by a flexible sleeve with the lower bins, feed box springs with adjustable drip feed baffles, cutting edge box connected to the vibrating body. Two drawerbody with vibration sieve grid, the upper screen surface for grading and remove light impurities, the lower surface of the springwire mesh sieve, for the removal of sand, mud. A stone in the lower end of the screen surface has adjustable reverse wind deflector, wind deflector and adjust the distance between the screen surface can be controlled discharge stones. Whole bodyvibration enclosed by two springs and the rear of the front end of an adjustable rod support. Two vibration motors mounted side by side in the rear of the large axis of the vibrating body, the two counter-rotating motor, the vibration of the vibration memberreciprocates. In the middle of the upper part of the vibrating body is equipped with a large hood, hood by the suction hose andpipe connected with an external disc throttle grip controls the pipeline. The stone mouth ends of the machine at the front portion, the net feed outlet in the rear of the lower vibrating body.