Oil flaking

Oil flaking, rolling embryo known as "tablet", "flaking." It is the use of mechanical action, is pressed into thegranular process from sunflower sheet. The purpose of flaking, and that tissue destruction sunflower seeds forsteaming and roasting to create favorable conditions for the press or the leaching time, so that the grease can be successfully separated. 
The basic requirements for oil is expected flaking embryo to thin, uniform surface, less powder, do not revealoil, pinching soft, loosely spread, powdered controlled at 1 mm mesh sieve material does not exceed 10 percent to 15 %.

                   
After completion of the rolling material embryos Embryo heated to control the flooding point at about 7%, the powder is controlled at 10% or less. When the billet thickness increased to 0.4 mm or more, and even increasethe amount of solvent, it is difficult to achieve a low residual oil rate. Therefore, we must use hydraulicpressure flaking machine, so that the embryo at 0.25-0.30 mm slice thickness control and embryo piece solid.This will not only not increase the degree of embryo powder tablets, but also conducive to the leachingsolvent. Common equipment: one-on-roll-embryo, embryo on roll.